Specifically Designed to Be Installed on Collaborative Robots.
Our Cobot kits have been pre-engineered to come complete with the correct diameter and quantity of REIKU metal bands or velcro straps combined with the necessary 17, 23, 29 or 36 mm REIKU clamps, jaws and conduit.
The Velcro Strap version holders are recommended for Cobots that operate at slow to average speeds with moderate conduit loads when filled with cables/hoses. Two sizes of straps area available one for Cobot arm diameters up to 55mm and one for larger Cobot arms up to 110mm diameter Each Velcro Strap is equipped with an integral Rotary Base (lazy Susan) which allows the Gripping Clamp (conduit clamp) to rotate on its base axis.The straps are lined with a rubber based backing in order to resist rotating on the Cobot arm.
The Metal Band version holders are recommended for Cobots that operate at higher than average speeds or are equipped with heavier conduit loads when filled with cables/hoses. Six sizes of straps area available for Cobot arm outside diameters up to 54, 66, 75, 86, 100 and 108mm. Each Metal Strap Band is equipped with an integral mounting plate where the Gripping Clamp (conduit clamp) is mounted keeping the clamp in a fixed orientation/direction. If the application requires that the Gripping Clamp (conduit clamp) needs to change direction then a Rotary Base Flange can be installed under the clamp which will allow the Gripping Clamp (conduit clamp) to rotate on it’s base axis.